[Mick]

Originally Posted by Gordon Booth

Mick, the water feeds into the soap tray so you need it in place.
Get one of the two part adhesives(Aroldite?) , two tubes in a pack, they set like rock when you mix them.£3 or £4.
Give the tray and the side a thorough clean,stick the side on with them, put plenty of glue on the inside then it doesn't interfere with the drawer fit in the washer. Don't put too much setting agent in, it thins the adhesive down, you want it nice and thick. So let it set for a full day to be sure.
I've repaired all sorts of things with that stuff, it's really strong and sticks to anything.
Then use tablets or capsules as gpick 24 suggests so you don't need to move the drawer again.

The bit of plastic only has a very thin edge to stick onto the door then the soap dispenser sits in another very thin bit of plastic" _| "like this poor design molded out of one bit once it snaps very hard to grip until it sets