Off B&Q site.........
The Windsave wind turbine delivers up to 1KW of supplementary energy synchronised and adjusted to supply directly into your household power circuits, using Windsave's unique technology the appliances in the house will absorb energy from the turbine before using grid voltage. This could contribute to a potential energy saving for the average home whilst reducing the household CO2 emissions.
Product Features
Brand: Windsave Product Type: Wind Turbines
Additional Information
- This product is not available for self-install
- You will be contacted on purchase of this item regarding a survey pre-installation
- Survey required pre-installation
- Planning permission will be required - please check with you local council prior to purchase
- AC Input (Mains): 230 Volts (nominal) ac, @ 50Hz
- Power Input (Mains): 6 Watt (Power consumption of the Plug n Save ™ unit in "standby" mode)
- Rated Power Output: 1kW @ rated wind speed
- Rated Wind Speed: 12.5m/s
- Cut-in Wind Speed: 3.5 to 5 m/s @ hub height
- Cut-out Wind Speed: 14 m/s@ hub height
- Reference Extreme Wind Speed: 35 m/s @ hub height
- Wind speed figures assume a steady value, as gusts to this figures will not always provide maximum output
- Operating Temperature Range, Generator: - 15C through + 40C at altitudes < 1000m above sea level
- Weight Generator System: 25kgs excluding support pole and brackets
- Weight, Plug n Save ™: 11kgs
- Dimensions - Generator Assembly: 320mm long x 150mm wide x 110mm deep support shaft
- Swept Area, Blade Assembly: 2.4m sq
- Swept Diameter: Blade Assembly: 1.75m
- Dimensions: Plug n Save ™: 535mm long x 315mm wide: 130mm deep
- Noise, Generator System: 52 dBA 5m behind turbine @ 7m/s gusting
- Noise, Generator System: 33 dBA 5m behind turbine @ 5m/s gusting
- Operating Speed Range of Blades: 100 - 900 rpm (useful power output range)
Price £1498.00