[AccyLass]

Originally Posted by derekgas

The braided link will have a slotted screw in the centre of the valve attached to the cold water pipe (the smaller one at the top), turn the screw a quarter turn, you will hear water going in to the system, turn it of as said before at 1.5 bar, I have to say also, that, that is some of the worst plumbing pipework I have ever seen
The gauge could be the thing on the left before the lights on the front, may just be coloured green to red, dont go into the red.

Not down to us! Tis just like the electric wiring in the kitchen, wired an under the cupboard light thro a socket on the wall..... with speaker wire!!!

Can I do this with a screw driver?

Not too sure about this, there is the timer... 3 twisty things... summer and winter thing... "hot and cold thing" (not too sure what it is) for water and radiators. We had to get thermostats on all radiators as there is no thermo in the house
There are loads of lights on it, I'll have another look and see if I can see this gauge thing


Thanks again, the help is much appreciated