Accrington Web - View Single Post

Neil · 03-12-2009, 17:49

can you post what all the writing on the relay is please? It looks like a standard 24V dc relay. How many pins are on the bottom. I would guess at 4 or 5. You naff picture looks like there are 2 of them mounted next to each other, is that correct.

What is melted, the relay? Are there any copper track burnt off on the bottom of the circuit board. You might find the fan is faulty and caused the damage on the circuit board.

On the new relay picture there is a contact drawing, second line from the bottom after the VAC. Does the old one have the same drawing on it? Do the position of the pins on both old and new relay match?

03-12-2009, 17:49	#2
Neil Administrator Ace Driver Champion! Onslaught 2.1 Champion! Defender of the Holy Pig Champion! Join Date: Mar 2005 Location: Oswaldtwistle Posts: 17,103 Liked: 607 times Rep Power: 290757	Re: Dehumidifier parts?????? can you post what all the writing on the relay is please? It looks like a standard 24V dc relay. How many pins are on the bottom. I would guess at 4 or 5. You naff picture looks like there are 2 of them mounted next to each other, is that correct. What is melted, the relay? Are there any copper track burnt off on the bottom of the circuit board. You might find the fan is faulty and caused the damage on the circuit board. On the new relay picture there is a contact drawing, second line from the bottom after the VAC. Does the old one have the same drawing on it? Do the position of the pins on both old and new relay match? __________________ Site Forum Rules/ Site Disclaimer can be seen from this link