Re an earlier post, I found this rather interesting:-
1.
IDENTIFICATION OF THE SUBSTANCE PREPARATION AND THE COMPANY:
PRODUCT NAME:
Red Standard Smoke Pellets
APPLICATIONS:
A smoke generation pellet for the marking of air flows, for theatrical or
special effects
PRODUCT CODE:
PH001C
SUPPLIER :
Arctic Products Ltd, Nina Works, Gelderd Road, Leeds, LS12 6NA
Tel: 0844 871 8461 Fax: 0844 871 8462
HAZARDOUS INGREDIENT(S) CAS No %(w/w) Symbol R Phases
Potassium Chlorate 003811-04-9 22.0 O,Xn R9 R20/22
3.
HAZARDS IDENTIFICATION
Ignites readily, burns without flaming, giving dense coloured smoke.
EYES
Immediately irrigate with eyewash solution or clean water, holding the eyelids apart, for at least 15 minutes.
Obtain medical attention.
SKIN
Take off immediately all contaminated clothing. Wash skin with water, followed by soap and water. If large
areas of the skin are affected, or if irritation arises seek medical attention.
INHALATION
In severe cases, remove patient from combustion exposure. If product recovery is not rapid or complete seek
medical attention.
INGESTION
If swallowed, rinse mouth and drink immediately two or more glasses of water or milk. Seek medical attention
and show this Data sheet, if possible.
EXTINGUISHING MEDIA
use large volumes of water as a spray or fog, avoid use of water jet. Contain run off water with for example
temporary earth barriers.
FIRE FIGHTING PROTECTIVE EQUIPS:
A self contained breathing apparatus and full protective clothing must be worn in fire conditions