Building a PC

M

***Mr D***

Nori Brick
Tackler
Going to attempt to put a new PC together Myself.

Here is the Spec I have though of. any comments, suggestions welcome.

Nice Case
Power Supply - 600w -
M Board - Inter Bad Axe or - Gigabyte GA_965P_DS4 ?
Ram - 2gb Good Quality - Corsair - 800mhz DDR2 6400
Processor - Intel - E6600 Due - or AMD FX 70 ???
G CArd - Gainward - 7950Gt -
H Driver Raptor 10.000rpm - 74Gb -
Extra Cooling -

Going to be my first attempt at a DIY computer build, the only thing that worries me is the heat sink.
 
***Mr D*** said:
Here is the Spec I have though of. any comments, suggestions welcome.
Click to expand...

get some good accidental cover so if it goes wrong you can throw it down the stairs and get a new one on accidental damage

make sure you get new for old policy ;)

one serious tip

no matter what nerd tells you do not go for a motherboard with intergrated graphics , all it will do is eat into your system memory/ram , if you are going to buy a board with intergrated graphics you may as well just buy a piece of crap from pc world, also intergrated graphics lack a lot of features that stand alone graphics cards do and you will probably run into a lot of issues with games or have to lower graphics quality to play them properly

on board sound is ok but graphics is a huge no no , even if your not planning on playing gamesthe onboard graphics will slow your system down BIG time

spend an extra 50 or so quid and get a half decent ati card , preferably pci express so make sure you buy a board with a oci express slot and not agp

scew intel they are overpriced stick with amd , cheaper and just as fast
 
Last edited:
nuy one ready made...

Cheaper, easier, less agro

I used to build PCs for fun, it was a way of getting more performance than I could afford in pre built. Nowadays, you can't buy he bits for the price that people are selling PCs at.
 
but where does he buy one ?

pc world are garbage and the likes of time etc are just as bad


i kid you not my brother bought a media center system from pc world and 5 mins after he switched it on teh fan fell off the processor and teh whole system had to be replaced

you want a decent pc build one your self
 
Scare mongering rubbish. :eek:

Sorry mate but if 'every' PC sold by PC World was crap then they would have gone out of business years ago. the build quality is down to the manufacturer and the likes of Packard Bell, Toshiba, etc are decent. Whos to say your mate didn't bounce the PC round in his boot all the way home dislodging the fan.

There are plenty of other mail order/online places as well, pick up a copy of Micro-Mart its full of them.

Onboard graphics again is fine if all you want is a Internet/Office/email. you really don't need 128M gfx for that. Its more important to consider what you want a PC for and then spend the money on the bit that will most influence its perceived performance. I bought a new laptop a couple of weeks ago , I had got it down to a choice of two, one dual core with slightly better gfx chip or a single core, still reasonable gfx but a far nicer screen. I reasoned that I would rarely push the CPU(as 99% of people won't) or play the latest games but I would be looking at the screen a lot. So I went for the better screen as this will improve my perception of its performance.
 
I avoid using places like PC World because of their crap service or knowledge rather than the build of the machines, although I would totally disagree with entwisi about Packard Bell, wouldn't touch one with somebody elses barge pole !!!

I use a shop in Nelson who will build whatever spec pc you want. You can buy the parts and build it yourself or for £25 they will build it for you ( lot less hassle if things go wrong). Is there not a shop like that in Accrington ?
 
Bought my pc from pc world three and a half years ago only ever had one problem with it, still going strong.
 
chav1 said:
get some good accidental cover so if it goes wrong you can throw it down the stairs and get a new one on accidental damage

make sure you get new for old policy ;)

one serious tip

no matter what nerd tells you do not go for a motherboard with intergrated graphics , all it will do is eat into your system memory/ram , if you are going to buy a board with intergrated graphics you may as well just buy a piece of crap from pc world, also intergrated graphics lack a lot of features that stand alone graphics cards do and you will probably run into a lot of issues with games or have to lower graphics quality to play them properly

on board sound is ok but graphics is a huge no no , even if your not planning on playing gamesthe onboard graphics will slow your system down BIG time

spend an extra 50 or so quid and get a half decent ati card , preferably pci express so make sure you buy a board with a oci express slot and not agp

scew intel they are overpriced stick with amd , cheaper and just as fast
Click to expand...

LOL Most Household Insurance comes with Accidental Damage to Personal Computer for free.:rolleyes: ;) :cool:

Well firstly I have to agree with the comment PC world, what a load of rubbish, I swore I would not buy anything from there again after a eventfull printer purchase 3 years ago and a USB cable row.;)

I will not buy a pre built machine as they are a rip off WAY to dear for the spec I want, I do a lot of online gaming and play the newest games.

I believe the Intel Chip will be VERY POWERFULL when over clocked, better if not as good as the FX70 AMD monster.

Mother Board for Graffics. LOL - I mentioned the Nvidia 7950 GT as the one I am looking at although the 8800 seems intersting, I do believe though ATi are bringing a new one out soon the willbe 50% More powerfull than the 8800.

If you see my list its a Top Spec Machine I dont want a PC world PC which has 1 good bit & 20 bad bits.

My List comes to around the £1000.00 figure. To Buy a pre Build around £1700.00 Simmaler Spec.
 
thought about doing something like this meself! anyone ever been to Emit? and is it ok or should i not bother!
 
panther said:
thought about doing something like this meself! anyone ever been to Emit? and is it ok or should i not bother!
Click to expand...

Do you mean building one yourself?

Emit = Time

Seems the Internet is the best palve for parts.

ie. Scan - OverClockers Uk Ect.
 
entwisi said:
Scare mongering rubbish. :eek:

Sorry mate but if 'every' PC sold by PC World was crap then they would have gone out of business years ago. the build quality is down to the manufacturer and the likes of Packard Bell, Toshiba, etc are decent. Whos to say your mate didn't bounce the PC round in his boot all the way home dislodging the fan.

.
Click to expand...

pc world target people who know sod all about computers and very clever wording in their comercials like , latest technology , most powerful processors etc and to top it off make out their staff are soem kind of pc guru's when the truth is once you ask a question that isnt covered in teh sales speel that have written on a peice of paper somewhere they direct you to the one person in the shop who they think may have an idea what your talking about

they also have the magic lure of finance so theres another reason why they attract so much custom because not everyone can buy a pc outright and its a quick solution to getting a pc

my brother didnt boot his pc around it was shabbyly put together probably by somone working for less than minimum wage

seriously how can you expect anything to be of any quality from somwhere that throws in free printers and cameras with a pc and still makes a huge proffitt , the parts used are of teh lowest grade quality

you give me and pc world the same specs to build a machine and my machine will out perfom it any day of the week simply because i will build it with better quality parts and set it up a damn sight better infact my 10 year old son could build a pc better than pc world

you get what you pay for and pc world are crap i would much rather buy the parts individualy from scan and have somone put it together for me if i dint know how to

time were crap and they used the same parts as pc world

to anyone thinking of going to pc world i recomend you take a look at other options before you commit your money or to a finance agreement, most people will have friends who have kids who can build better systems for them
 
***Mr D*** said:
Do you mean building one yourself?

Emit = Time

Seems the Internet is the best palve for parts.

ie. Scan - OverClockers Uk Ect.
Click to expand...

emit sell all the parts that didnt quite make it through time's quality controll and also sold the systems that were taken in under the part exchange deal time had going at one point

went down there a few weeks ago and they dont realy sell systems anymore but thats because obviouly time is shut down

they sell mostly plasma tv's etc and a few componments for computers

go to www.scan.co.uk

if you ring them up and tell them what you want and how much you have to spend they will help you out on what parts to buy
 
lancsdave said:
I'd rather poke my eyes with needles than go to EMit. Biggest cowboys this side of the wild west.
Click to expand...

I know someone who used to work for Time and he said a lot of the stuff Emit had was reject stuff Time got back from customers because it didn't work and they'd had to eventually replace it when they failed to repair it. Doesn't sound like something I'd want to consider even waving a barge pole at from a distance.
 
I've only been in Emit twice, both time with Mick and Mez :D

I'd claim it was only to relieve the boredom when I was off work with my appendix last year but I actually bought a cable from them so I can't[1]


Otherwise I wouldn't touch them either.

As for P-Bs I've seen a few in my time and they may be built so you can't easily swap bits about but in general, those I have seen have been well put together and seem to last quite well.



[1] I didn't go there to get it but I did need one and they happened to have one for a quid so I would have been daft not to buy it.
 
oooh somone mentioned an incident with pc world and a printer cable , i assume they wanted you to buy one as it dosnt come with the printer lol

i think pc world charge between 5 and 10 quid for a printer usb cable but my tip of the day is screw them and go to poundland or any other pounshop and get one for a quid , exacly the same and you can also buy usb extension cables for a quid too for if you want your printer further away from your pc
 
chav1 said:
oooh somone mentioned an incident with pc world and a printer cable , i assume they wanted you to buy one as it dosnt come with the printer lol

i think pc world charge between 5 and 10 quid for a printer usb cable but my tip of the day is screw them and go to poundland or any other pounshop and get one for a quid , exacly the same and you can also buy usb extension cables for a quid too for if you want your printer further away from your pc
Click to expand...

Ohh no it was better than that.

I purchased a Printer and in big writing on the front it said USB, I mistakingly though that it must be included and was not advised other wise when buying, I then got home went to set up my new printer and Guess what No Lead.

Upon my return to PC world I was not very happy and as you do complained, to be surrounded by 3 young muppets arguing with me, when I said I presumed it had one in as it says USB in big letters on the front, he remarked, well it says PC on the side do you think you get a computer free aswell. I nearly smacked him. Instead I just let them and most of the customer in the shop at the time that PC world are complete rubbish (In a french way)

As for the lead £1.00 in good old accy centre.
 
The thing about PC world is if you know what you want and what they have serves the purpose and the price is right it's OK - like the stacks of CDs or something. It's when you approach one of the members of staff expecting an intelligent reply to a query that you can rapidly lose the will to live.
 
You must log in or register to reply here.
Back
Top