Electritian needed ,

ian1

ian1

Local
Weaver
As above , i need a recomended sparky to have a look at my fuse box at home , and give me a quote on what needs fixing / replaceing , the 30 amp fuse (old baker light ) is getting red hot when we put dryer, wall fire ,deep fat fryer on , i went under stairs and it was full of smoke and could see the fuse glowing !:eek: i turned off the fryer and it cooled down but the fuse box and fuse look a bit sad , and i don't want it to burst into flames !!:dflam:
any help would be brill !
ian
 
You had 3 pieces of equipment switched on that probably all pull 10 amps or more. Add to that the other electrical equipment plugged in and you were overloading that 30amp fuse which caused it to get warm. A photo of it would have been a nice reminder to other people to get theres checked out. You probably have a bad connection on that fuse causing the heat if it got that hot. The fuse would usually blow if it was that hot. What was glowing? The middle of the fuse or one of the ends?

I am glad you are going to get it looked at, please do it really soon before you have a fire.
 
I could see it red hot at the top of the fuse , probly were the fuse plugs in to the box , I though too why has it not blown , the plastic cover of the box had started to melt a bit too ,
Thanx
Ian
 
ian1 said:
I could see it red hot at the top of the fuse , probly were the fuse plugs in to the box , I though too why has it not blown , the plastic cover of the box had started to melt a bit too ,
Thanx
Ian
Click to expand...

Unplug everything and do not turn anything on until you have had your electrics checked, unless you like seeing men in firemans uniform.
If you can't find an emergency electrician, I'm sure the fire brigade will recommend one.
Better safe than sorry, by the way, when I say everything I also include your computer.
 
You are still online, I hope you live alone, I don't want to hear about a family burnt to death, stop using your electric, if things are as bad ad you described, don't use anything.
 
ian1 said:
I could see it red hot at the top of the fuse , probly were the fuse plugs in to the box , I though too why has it not blown , the plastic cover of the box had started to melt a bit too ,
Thanx
Ian
Click to expand...
Don't think why just turn it off and get it looked at by an expert.
The 30 amp fuse will carry a lot more than 30 amp before it blows. You have a bad connection which is causing the heat. A lot less than 30 amps is needed to create that heat. The more current you pull through that bad connection the more heat you will get.

It is unsafe, do as Less says and turn off your electric or you risk a fire tonight.
 
Last edited:
All sockets are turned off and fuse is out got able electrics coming round tomorow , it (fuse ) has nearly fell in two when I took it out ,
Thanx for the advice
Ian
And am on mi phone writin this not mi computer ,
 
Sorted , a new holder was needed as two wires were shorting it out , I have a pic of what's left of the fuse and holder , I'll up load it when I can ,
Ian
 
Mmmmm, that don't look like fuse wire to me. Looks like spmeones put a piece of copper wire in instead, no wonder it didn't blow and got red hot. You were very lucky.:eek:
 
Alan Varrechia said:
Mmmmm, that don't look like fuse wire to me. Looks like spmeones put a piece of copper wire in instead, no wonder it didn't blow and got red hot. You were very lucky.:eek:
Click to expand...
Nope fuse wire in fuse 30 amp , the copper wires are what was the cable they were shorting out on each other and mealted there wire coating ,
!! and yep was very lucky !!
i put lotto on ,but never won !!
 
ian1 said:
Nope fuse wire in fuse 30 amp , the copper wires are what was the cable they were shorting out on each other and mealted there wire coating ,
!! and yep was very lucky !!
i put lotto on ,but never won !!
Click to expand...

Not very clear but the end of the cartridge fuse looks as though it has been "repaired" so it could be of higher rating than printed on the body?
 
The top bit of the fuse came off when I pulled it out , I lived here for 9 years and I ain't put any higher amp wire in it , so I been luckY for 9 years then I guess ,
Thanx for your input :)
Ian
 
Barrie Yates said:
Not very clear but the end of the cartridge fuse looks as though it has been "repaired" so it could be of higher rating than printed on the body?
Click to expand...

Its not a cartridge fuse is a rewirable one so depends what fuse wire you wire it with. Horrible things by modern standards but many people still have them. I replaced mine when we moving in about 8 years ago.
 
Neil said:
Its not a cartridge fuse is a rewirable one so depends what fuse wire you wire it with. Horrible things by modern standards but many people still have them. I replaced mine when we moving in about 8 years ago.
Click to expand...

Take your word for it, would probably have been clearer if the fuse holder was viewed from the other side - the last wired fuses I saw in UK was RAF MQs in 1975 and they changed those for plug in MCBs.
Is there a way to enlarge the thumbnail pictures?
 
You must log in or register to reply here.
Back
Top