Glass help

Mick

Mick

Resting in Peace
Overlooker
The Glass shelf in our fridge has been broken, so i have been looking for a replacement,:(
A member of Accyweb has kindly offered me a shelf out of there old fridge but its too big and needs 2" cutting off :o
i was just wondering if there was any member that is good with glass cutting and could do this for me ?
There is only one chance of getting it right and i am useless at cutting glass also i would think the glass is tempered so need someone that is used to this .
any one that can help please let me know ta
i will pay for this being done by the way:D
 
I have a glass cutter somehwere Mick, and have cut lots of glass, the trouble is, when you cut it, you have a very sharp edge, if you are ok with that, will cut it for you.
 
That would be great derek the sharp edge wont matter to much as once in the fridge it wont be comming out again i will sort a collection of the glass and let you know .
Sometime during the week but over in Preston tomorrow will pm you when i have the glass thanks
 
Slight problem Mick, if it's toughened glass and you attempt to cut it, it will just shatter into tiny pieces because of the heat treatment that it will have had.
 
I would expect a fridge glass shelf to be toughened glass. If it is you will be unable to cut it. The guy at Victoria glass explained to me that they toughen the glass after it has been cut because you can't cut it afterwards.
 
had the same problem mick, a holiday maker broke ours in spain, we were told by a few folk to get one cut with a firm or it would shatter if they cut it. we just bought a piece of toughened glass from them. car is off road at moment,but if ya can get a lift, have a sneck up Whinney Hill Tip, theres usually a few fridges up yon, ya may get one the size ya want.
 
Mick I am getting a new fridge tomorrow, am throwing the old one out, the glass shelf is 43cm x 21cm if that's any good to you
 
jaysay said:
Mick I am getting a new fridge tomorrow, am throwing the old one out, the glass shelf is 43cm x 21cm if that's any good to you
Click to expand...

whats that in English ? :D the shelf is 17" x 13" thats the size i need
 
Less said:
Slight problem Mick, if it's toughened glass and you attempt to cut it, it will just shatter into tiny pieces because of the heat treatment that it will have had.
Click to expand...
I dont think this is toughened by the way its broke only broke a big chunk out the corner did not shatter
 
mick said:
I dont think this is toughened by the way its broke only broke a big chunk out the corner did not shatter
Click to expand...

Most shelves these days are toughened, all to do with good old health and safety, if it's an old piece it may not have any mark telling you, these days they have to have a sign on stating that it is toughened, (EEC).

You could be lucky, but if you are going to cut it do it outside in a place that can easily be swept otherwise you will be picking up tiny pieces for ever and a day when toughened glass shatters it goes everywhere.
:D
 
Less said:
Most shelves these days are toughened, all to do with good old health and safety, if it's an old piece it may not have any mark telling you, these days they have to have a sign on stating that it is toughened, (EEC).

You could be lucky, but if you are going to cut it do it outside in a place that can easily be swept otherwise you will be picking up tiny pieces for ever and a day when toughened glass shatters it goes everywhere.
:D
Click to expand...

I know what you mean about toughened glass, do you think a diamond saw would cut it.

Relaw.
 
When I sent my old slimline fridge for scrap a year ago, I thought that the glass shelves were too good to scrap.
I saved 3 of them and they are a good fit for my bathroom windowsill, where I put potted plants in summer.
I could live without them if you seem to have greater need.
The fridge shelves were 'split shelves' - ie each were in 2 parts
The 3 I kept all measure 37cm x 16cm
If they will fit - you are welcome to them

Ps just seen earlier posts - wont fit will they?
 
Last edited:
if its clear glass mick, I will be able to cut it, any way up, if it breaks, have to start again!
 
derekgas said:
if its clear glass mick, I will be able to cut it, any way up, if it breaks, have to start again!
Click to expand...

Toughened can be clear, patterned or opaque just looking at it you can't tell that's why these days they should be marked with a kite mark or something similar.

I hope it isn't toughened, then the problem will be solved, but wear safety equipment and do it in an area that can be easily swept just in case.
:D
 
You must log in or register to reply here.
Back
Top