Quote:
Originally Posted by glasgow guy
right , cheers for this derekgas...but is there any specific size/diameter of flexy pipe I should be getting ? or is it all standard...bearing in mind the pipes are old..perfect nick but just not modern..
and what do you mean 'take a bit out the middle' ?
|
you can buy flexi pipes which are pushfit both ends, so they fit pipe to pipe, or, flexi push fit one end, and 3/4 tap connector at the other, if pipe to pipe, you have to cut out a section of pipe, the pipes will be 3/4" on hot side, and 1/2" on cold side, if you tell merchants this, they will give you correct type.